|
 |
|
|
|
BIDETS & SHOWER MAINTENANCE TIPS
 
- Please Note That Abs Is A Sort Of Plastic Resin & Has Moulded, Polished & Than After Having Copper Base; It’s Got Chorme Finish To Give You Pleasant Look. Care For These Few Points To Have A Pleasant Look Always.
- These Saves You From Possible Any Type Of Damage From Heavy Material Products, Breakage Of Your Costly Bathroom Fittings & More Important Are Abstract To Temperature Reaction On Surface Body To Let You Save From Cold Or Hot Top’s & Any Type Of Injury To Your Gentle Skin.
- When Fixing Anyone Of These Please Don’t Use Wrench Or Hard Tool To Affix Them; Instead Use Rubber Waters Provided With The Product & Use Teflon Tape To Fill If Any Gaps Still Persists & Let Tight Them With Putting Pressure By Hands After Covering Top Surface By Cotton Cloth To Avoid Any Possible Damage.
- Avoid To Use Self To Do Engineering; Please Take Help Of Qualified Plumber To Make Them Service; If Required; Because Inside Every Fitting; Very Small Parts Persists & Usually Gone Away With Pressure Of Water Lying Inside The Shower. Wrong Fittments; Even Wrong Placement Of Internal Part Can Also Make Product Faulty; However Each Product Has Tested For Long Life Hassle Free Thousands Of Operations.
- Do Not Use Harsh Cleaning Agents Containing Abrasives And Acids., Instead Use A Soft Sponge Or Wet Cloth With Soapy Water/Diluted Vinegar To Protect The Surface Finish.
- Our Abs Items Are Polished, Then Given Strong Copper Base & Protected With A High Degree Of Chrome Finish To Help Prevent Tarnishing. But This Has Limitations & In Time May Deteriorate From Handling, Cleaning Or Exposure To Atmospheric Conditions Such As Extreme Climate, Pollution, Proximity To Salt Water, Humidity And Ultraviolet Rays. Eventual Tarnishing Is Therefore, Not A Defect, But A Normal Process.
- Clean The Overhead Tank Thoroughly Before The Supply Starts. It Is Suggested That The Overhead Tank Must Be Cleaned At Regular Intervals To Avoid Deposition Of Dusty Particles To Chock The Mouth.
- Don’t Put High Pressure On Lever Or Clogg Spring; It Happen’s When You Use The Bidet After Such A Long Time & Salt Or Dust In Water Clot The Springs; Open The Front Face With Care Of Internal Parts & Than Remove Gently Foreign Particles From Inside The Assembly & Slightly Oil Or Grease It To Work Properly For Years.
- Avoid To Let Them Drop Again & Again On Floor; Because It Dismantle It’s Internal Fittments Parts & Strongly Damage Too The Surface Body Finish; As It’s Chop Away & Get Cracked.
- These Are Hygienic & Easy To Use Products But Needs Small Cares From Your Side To Let Them Serve You In Best Way.
|
|
I - 2113, DSIDC Industrial Park, Narela Industrial Area, Delhi – 110040 Phone no: 011-32065002 Telefax:-011-27785003
Contact Person: Mr Krishan Kalra • Cell: 093101-15426 • E-mail: anmolsanitations@gmail.com
© 2009 Anmolsanitations.net • All Rights Reserved •
|
|
| |
